display / touch / bonding solutions
Glove touch firmware is specialized software for PCAP touch controllers like GT928 series that uses algorithms to filter false touches from rain or water droplets while detecting inputs through thick industrial gloves. CDTech custom-tunes this firmware for industrial displays with OCA bonding and wide-temp IPS panels (-30°C~+85°C), ensuring reliable performance in wet environments like automotive HMIs and factory controls.
Check: How Does Custom PCAP Touch Integration Add Value to TFT LCD Displays?
Glove touch firmware is custom programming for projected capacitive (PCAP) controllers that increases sensitivity for glove capacitance up to 10mm thick without triggering on water. CDTech tunes this for GT928/FT ICs in its 10,000㎡ factory, using baseline tracking, noise suppression, and gesture validation to distinguish glove inputs from water.
Industrial applications need water reject PCAP to prevent false activations from rain or condensation in outdoor vehicle dashboards and wet factory HMIs, avoiding safety risks and downtime. CDTech's zero-defect policy and IATF16949 certification ensure high reliability for mission-critical uses in instrumentation and medical devices.
Glove touch firmware ignores rain through dynamic threshold adjustment for low-capacitance gloves, multi-touch pattern analysis rejecting scattered droplets, and I2C calibration for OCA-bonded screens. CDTech's 3,500㎡ dust-free workshop enables prototyping like the S101HWX53EP-FC47-AG 10.1" vehicle panel with LVDS interface and CTP touch.
"Our engineering team customizes glove touch firmware for extreme conditions, tuning GT928 controllers on wide-temperature IPS panels from -30°C to +85°C," says CDTech R&D Lead Engineer. "For the 12.3" S123BWU11EP display (1920×720, 950 nits, LVDS 60pins), we achieved 99% glove accuracy in simulated rain tests with low MOQ runs starting at 10 units. As a National High-tech Enterprise since 2015, we leverage our 2020 touch panel workshop and 2024 automatic POL/LCD/CTP equipment for seamless integration with OCA bonding."
"This ensures zero-defect performance in automotive and industrial HMIs exported to Europe and Americas," adds Senior Firmware Specialist. "Our ISO13485 certification supports medical applications, with rapid 4-week prototyping."
Key features include rain ignore modes, glove thickness calibration up to 15mm, wet-condition stability, and compatibility with LVDS interfaces on wide-view IPS panels. CDTech integrates this with OCA bonding for enhanced clarity.
| Feature | Standard PCAP Firmware | CDTech Glove/Water Reject Firmware |
|---|---|---|
| Water Rejection Rate | 60-70% | >95% (IATF16949-tested) |
| Glove Thickness Support | <5mm | Up to 15mm with OCA |
| Temp Range | 0°C~70°C | -30°C~+85°C |
| Customization Lead Time | 8-12 weeks | 4 weeks (in-house CTP lines) |
Industries like industrial control for HMI panels, automotive for dashboards, medical devices for wet-room use, and smart home for outdoor kiosks benefit most. CDTech exports these OCA-bonded, wide-temp displays to Europe, Americas, and Japan from its 10,000㎡ facility.
Check: Custom LCD Display
Implement by specifying glove/water needs, selecting GT928 controller, prototyping with CDTech's OCA bonding, and validating via rain/glove tests. Contact sales@cdtech-lcd.com for 4-week turnaround using 2017 glass-cutting patent and auto-POL/CTP lines.
Choose CDTech for quad certifications (ISO9001, ISO14001, ISO13485, IATF16949), Shenzhen Software Enterprise status, and exports to Japan, Russia, and Middle East. Its 13+ years experience since 2011 and in-house touch production ensure superior glove water rejection on panels like S101HWX53EP-FC47-AG.
CDTech uses GT928/FT series ICs with custom I2C tuning for water rejection, integrated into TFT LCD assemblies with CTP support.
Yes, it supports 10-15mm nitrile gloves with high rain ignore rates, tested on -30°C~+85°C panels like vehicle displays.
Low MOQ starts at 10 units, with 4-week prototyping in CDTech's 3,500㎡ dust-free workshop.
Yes, in-house OCA bonding enhances touch clarity in wet/glove scenarios for automotive-grade reliability on IPS panels.
CDTech ensures zero-defect via ISO/IATF certifications, rigorous testing, and its policy since 2011 in a 10,000㎡ factory.
CDTech delivers glove touch firmware that programs PCAP controllers to ignore rain while enabling precise glove detection on wide-temp IPS displays. Trusted globally for industrial and automotive solutions, contact +86 0755-23032202 or sales@cdtech-lcd.com for IATF16949-certified, low-MOQ options from this 2011-founded TFT LCD expert.
By continuing to use the site you agree to our privacy policy Terms and Conditions.
