Copyright © 2020-2021 Shenzhen CDTech Electronics LTD. All rights reserved. Site Map Powered by iwonder.cn
Saudi Arabia asks two separate questions about a display, at two separate moments, and a shipment fails when the answers disagree. One is whether the product may be sold in the Kingdom; the other, whether this consignment may enter now. SASO owns the requirements, SABER is the platform where evidence is filed, and the two certificates differ in holder, validity and failure mode.
Most guides describe the portal screens. The structure behind them decides whether a container clears: which document answers which official, and where factory test reports are accepted or turned away. The saso saber lcd display file is two linked documents, not one event.
The first gate is the product certificate of conformity. It attaches to a model, states that the product meets the named technical regulation, and rests on a technical file: datasheets, safety and emission reports, a material declaration and label artwork.
The second gate is the consignment certificate. It attaches to a shipment, names the consignee, references the invoice and transport document, and points back to the product certificate covering the goods.
The two fail differently. A missing, expired or out-of-scope product certificate stops every future shipment. A consignment certificate that is wrong, or that cites a lapsed product certificate, stops one container while the product file stays intact. Neither substitutes for the other, and planning against one alone strands goods.
A display is measured against the electrical and electronic equipment technical regulation, which adopts baseline safety and emission standards rather than a display-specific text. SASO builds those baselines on IEC and CISPR, so a file that satisfies a Saudi reviewer resembles one assembled for an IEC-based review.
For an LCD module the baseline set is short. Safety is assessed to IEC 62368-1, the hazard-based standard for audio and video and information technology equipment. Emission follows CISPR 32, class A or class B by environment, the same test evidence that the EMC Directive relies on. Restricted substances are handled by material declaration rather than laboratory test.
The edition named by the regulation in force at filing governs, so a report to a superseded edition can be sound and still wrong. The current edition can be checked in the IEC Webstore before a report is commissioned.
Factory test reports are the raw evidence behind the first gate, read by a reviewer who never watched the test run. What travels is a document whose scope, standard edition and sample description must match the product being certified.
Rejections usually ignore the measurements. An unaccredited laboratory, a superseded edition, or a sample that no longer matches the bill of materials sinks a good file, and a supplier's own test sheet is engineering evidence, not regulatory evidence. Start from the module maker's quality and environmental documentation to see which controlled reports exist.
Yes in the normal case: one certificate per consignment.
The document attaches to a shipment rather than a model, so a second container a month later needs its own application even when the product certificate is unchanged.
A consignment certificate is built from shipment papers: the commercial invoice, the packing list, the transport document and the number of the product certificate it relies on. The reviewer confirms that the invoiced goods fall inside that certificate's scope, and that consignee, quantity and description agree across the set.
Two cases deserve a check before booking. Goods consolidated into one customs entry may need a single certificate even when several invoices feed it, while a split booking may be treated as two. Assume one certificate per entry and confirm with the broker before the goods leave.
Product certificates are commonly issued with twelve months of validity, and the expiry date printed on the document governs every shipment made against it. That line sets the year's rhythm: goods must be built, moved and cleared inside the window, and a container arriving after expiry has no product certificate behind it.
The failure is easy to create. A booking made in the final weeks can clear late, and a renewal started when somebody notices the date can open a gap in which the factory builds but cannot ship.
The remedy is a calendar. Work backwards from expiry by transit time plus a margin, set an internal renewal trigger, and keep current reports in one controlled place so that renewal updates existing evidence rather than rebuilding it.
When the consignee is a distributor, the second gate changes hands. The consignment application is normally made by the importing entity, because the consignee named on it must be the party taking the goods into the Kingdom and receiving the invoice. The saber certificate for a display therefore names a different company from the product certificate.
Two arrangements are common. The distributor files under its own registration and holds the consignment certificates while the factory holds the product certificate. Or the brand owner files centrally and the distributor appears only as consignee.
Write the choice down before the first order. When two distributors import the same model, establish whether one product certificate covers both, and name who takes the certificates and technical file when a distribution agreement ends.
Documents divide along the same line as the certificates. The product gate consumes evidence about design and is answered once. The consignment gate consumes evidence about one transaction and is answered every time. Mixing the two is the most common filing error.
| Document | Gate | Typically held by |
|---|---|---|
| Safety and emission test reports | Product | Manufacturer or laboratory |
| Product certificate of conformity | Product | Exporter or brand owner |
| Technical file and material declaration | Product | Manufacturer, across revisions |
| Commercial invoice | Consignment | Exporter; consignee receives original |
| Packing list | Consignment | Exporter or freight forwarder |
| Bill of lading or airway bill | Consignment | Carrier issues; forwarder holds |
| Consignment certificate | Consignment | Applicant for that shipment |
Originals matter less than a controlled copy. One named person should be able to produce a current, consistent set within a day of a query.
Saudi customs display module clearance rarely turns on whether a product is safe. It turns on whether the document set agrees with itself and the goods match what was certified: invoice against packing list, packing list against certificate scope, consignee against importer of record.
The causes recur. The product certificate expired in transit. The invoice uses commercial language while the certificate uses a model number, with no link written. The certificate covers a family excluding the size shipped. The consignee differs from the importer of record. Quantities shift after a partial load. Arabic labelling is missing where the regulation calls for it. A restricted substances declaration names a superseded revision.
None of this is a technical failure, so engineering alone cannot fix it. A line-by-line review of four papers before shipment costs a fraction of a demurrage day.
Certificate cost has two parts that behave differently. The product certificate is a fixed cost per model, paid once and spread across the volume shipped under it, so it rewards consolidating a range into fewer filings. The consignment certificate is a variable cost per shipment, rewarding fewer, larger movements and penalising a weekly rhythm.
Those incentives pull against working capital. Batching lowers the shipment count but raises inventory and the cost of being wrong about demand. Shipping little and often keeps stock lean and multiplies fees and administrative effort.
A workable rule is to batch by certificate and let demand set the rest, then review the pattern once a season, because a frequency chosen in the first year is rarely right for the second.
A certificate describes a product as it was built on a particular date, so a change to the build is a change to the claim. The triggers worth writing into a supply agreement are concrete: a new panel supplier or model, a different driver or backlight, a new factory site, a renamed model or added size, a change of brand owner, and a revision of the regulation.
Not every change needs a new product certificate; some need only an update to the technical file. The test is whether the change touches a characteristic the certificate vouches for: safety, emission or the material declaration. A bezel finish is usually documentation; a backlight driver with a different switching frequency is not.
This is where change control becomes a regulatory asset. A factory that notifies changes before shipment, as custom display sourcing programmes require, lets the holder re-file on schedule instead of discovering the gap at a port.
If your team is assembling a product certificate or consignment file for a display, CDTech can supply the datasheets, test reports and material declarations behind the part numbers you ship. Send the model, destination port and consignee type to [email protected] and the set can be matched to your file.
Does every shipment need a new consignment certificate?
Almost always, yes. The certificate is tied to a customs entry and to the invoice and transport document behind it, so a second movement in a later week is a separate application. What carries over is the product certificate: one valid product certificate can support many consignments during its life. The case worth checking is a split booking, where one order arrives in two parts. Confirm with the broker whether the entry is treated as one consignment or two before the goods are despatched.
Which SASO technical regulation covers displays?
Displays are normally assessed under the electrical and electronic equipment technical regulation rather than a display-specific text, with the regulation naming the baseline standards a laboratory tests against. In practice that means a safety standard of the IEC 62368-1 family for audio and video, information and communication technology equipment, a CISPR 32 emission limit, and a material declaration for restricted substances. The edition cited by the regulation in force on the filing date controls, so a report written to an earlier edition should be reviewed even when its results are sound.
Can test reports from China be accepted?
Reports issued by a Chinese laboratory are accepted when the laboratory holds accreditation for that specific test and the report describes the construction that will actually ship. The location of the laboratory is not the deciding factor; scope, accreditation and traceability are. Reports are turned down when the standard or edition does not match the regulation, when the sample description no longer matches the bill of materials, or when what is submitted is a summary without setup data. A report naming the exact panel, driver and revision is the one that survives review.
How long does the product certificate last?
Product certificates are commonly issued for twelve months, and the expiry date printed on the certificate governs the shipments made against it. Treat that date as a boundary for arrival, not only for departure. Renewal is usually lighter than first issue, because the test evidence and technical file already exist, but it still needs lead time and a current report. Where a model changes materially, the renewal may be handled as a new filing, so the change control record matters as much as the calendar.
By continuing to use the site you agree to our privacy policy Terms and Conditions.