CDTech LCD touch screen

display / touch / bonding solutions

NDA and Drawing Control for Custom Display Projects: Keeping a Bespoke Design Yours

Author: CDTech Publish Time:  Origin:

Most custom display programmes sign a confidentiality agreement in the first meeting, when there is nothing confidential yet. The drawings arrive months later, in dozens of revisions, through several inboxes, with no record that would let the agreement do any work. An NDA is only as strong as the record of what was disclosed, to whom, and under which revision. That record is built from unglamorous artefacts: a revision scheme that never reuses a number, a distribution log, a tool register with purchase evidence behind it, and an exclusivity term with a volume floor. This article describes commercial practice, not legal advice; enforceability is for your counsel.

An NDA without drawing revision control is unenforceable

A confidentiality agreement is a promise about identified information, not a category. Describe the protected material as the custom display or the proprietary artwork and the recipient can argue that nothing specific was designated. Revision control turns design intent into a numbered series of exhibits attached to the agreement. Drawings are documented information, controlled for distribution and change, as the ISO standards portal sets out.

Each release takes an identifier, an approval and a note of what moved, and the agreement defines confidential information by reference to that series. A disclosure can be pointed at revision C, sheet 4, watermarked to a named recipient. Whether a clause is enforceable, and in which forum, is for your counsel; the commercial task is to make the record complete enough that a dispute turns on copying rather than on which file was the design.

Revision numbers, distribution log and watermarking

Revision discipline fails in ordinary ways. An engineer emails a step file without a revision letter because a customer wanted a quick look; a tooling shop works from a drawing superseded last week. Each is a disclosure, and none appears in a record unless one exists.

The control set is short:

  • Unique revision identifiers, never reused, with a change note and approver.
  • A distribution log naming recipient, date, revision and medium.
  • Recipient marking: company, date and confidential legend on every page, with controlled copy labels.
  • A drawing register listing current revision and NDA exhibit number.
  • Return or destruction acknowledgements at project close.
  • Written approval before any drawing reaches a sub-supplier.

The watermark earns its place because leaks are rarely malicious. A jig maker forwards a drawing to ask about flatness, and the name on it identifies the path within minutes.

2.1 inch 480x480 round LCD display with RGB interface
A 2.1 inch 480x480 round LCD display with an RGB interface. On a bespoke module, revision control must hold the outline drawing, flex tail and pinout.

The tool ownership register and what each row proves

Tool ownership is settled in one sentence and disputed for a year. The sentence says the customer owns the tool; the argument starts when someone asks which asset, where it stands and what was paid. A register answers that in advance: it is the evidentiary spine of the NDA.

Register rowWhat it provesWhat fails without it
Identifier and locationWhich item is meantTitle attaches to nothing
Purchase evidenceWho paid, on which order, at what valueTitle is asserted
Title and lien termsWhether an unpaid invoice can hold itA paid-for tool cannot leave
Physical taggingThe item on site is the one registeredSubstitution is undetected
Custody and accessWho may use or inspect itOther work is unaddressed

Most rows already sit in a supplier's accounts, across a purchase order, an asset tag and a fixture list; the register is an assembly job. Who owns tooling is covered in tooling ownership and IP in display sourcing.

Can a tool be moved to another factory on notice

Yes, when the contract names the tool, notice and the cost.

Mobility is a contractual right, not a technical one. A press and mask set can travel; what decides the move is title, notice and who pays requalification.

A display tool is rarely portable in the way a purchase order implies. Bonding fixtures locate against one platform and laminators differ in pressure uniformity. Shipping is easy; proving the receiving line makes the same module needs a first article build and an optical check against the released drawing.

Three conditions make a move realistic: unambiguous title, so no lien holds the asset; notice long enough to qualify a replacement rather than book a van; and a cost allocation for requalification. The tool crosses a border too, so Incoterms 2020 decide who books freight and where risk passes, while a tool and the modules it makes do not share a customs classification.

Exclusivity: territory, term and the volume floor

Exclusivity is not a confidentiality concept that happens to sit in the same agreement. It is a commercial commitment to decline other work, and it carries a price somewhere, visible or absorbed into unit cost. Territory, term and volume price it.

Territory should be defined by market rather than factory location: a promise not to sell the module into Germany is narrower than a promise not to make it for anyone. Name the field of use as well. Term should attach to the amortisation it protects, because exclusivity past recovery is a concession the supplier will price. The volume floor is the part buyers forget: exclusivity rests on continuing purchase, so a binding floor with a defined consequence protects the supplier when orders thin. Miss it and expect a maintenance fee or a lapse on notice.

What the NDA must cover beyond drawings: masks, firmware, jigs

Drawings are the visible part of a display design and rarely the most copyable. The artefacts that decide how fast a competitor could reproduce a module sit elsewhere: the photomask set defining the pattern, the firmware driving timing, the bonding jig holding tolerance, the stack-up of optical films.

Masks and reticles need their own line, because they are both design and manufacturing asset: who owns the set, where it is stored, what happens at the end. Firmware needs a distinction between object code and source, and jigs embody dimensional decisions no drawing describes. Two categories are usually missed: the bill of materials, which reveals the polariser, driver and backlight used, and test limits, which record where the design is marginal. A substitution outside change control also undermines the RoHS declaration, and the R&D team can confirm which artefacts a design generates.

4.3 inch RGB TFT LCD module 800x480
A 4.3 inch RGB TFT LCD module, 800x480. Formats like this are often catalog items, so exclusivity attaches to the custom variant.

Residuals and reverse engineering clauses suppliers resist

Two clauses reliably slow a negotiation. A residuals clause lets a supplier keep general knowledge gained during the programme; a reverse engineering clause restricts what it may learn from hardware. Suppliers serve several customers in one category, so a broad ban would be signed only by a supplier not reading it.

The workable residuals clause is narrow: general skills and techniques retained by staff, not documents, excluding your dimensions, optical stack, test limits and firmware, with a notice duty so a supplier relying on it says so rather than reconstructing the argument later. Reverse engineering needs a narrower target still: teardown benchmarking is legitimate, so the clause should say your samples, drawings and test data will not be the basis of a product for another customer. The compromise turns on scope: named artefacts, a period, and a carve-out for independently developed designs.

Audit rights and escrow as enforcement evidence

An audit right is worth having even if never used, because a check changes how records are kept. The clause should define what may be inspected, on what notice, how often and at whose cost. Records rather than premises is the practical scope: distribution log, tool register, shipping documents, sub-supplier list, revision history.

Confidentiality runs both ways, so findings should verify compliance only. Escrow answers a different question: not what the supplier did, but what happens if it can no longer help. The deposit should hold native CAD, mask data, the tool drawing set and firmware source where held, released on insolvency or an uncured breach. The weakness is maintenance: a deposit made at first article describes a design that no longer exists, so tie updates to each revision release. Automotive customers prescribe the evidence structure, which is where AIAG manuals apply.

Handover terms if the relationship ends

Exit terms are cheap at the start and expensive to improvise later. They make a change of supplier a project with a schedule. A display programme carries more handover items than most: drawings, tooling, mask set, jigs, test limits, approved material list and process recipe.

A workable schedule names four things: the trigger events that start the clock; deliverables in native formats, because a drawing that cannot be edited has to be redrawn; a handover period during which the outgoing supplier keeps building; and a valuation method for tool buy-out, agreed in advance. Two details prevent disputes: a last-time buy window, and survival, because confidentiality, tool ownership and audit rights must outlive termination. Import formalities for a tool leaving the country are summarised through EU Access2Markets, and the custom sourcing guide covers how these terms sit beside specification.

If a custom display programme is about to exchange drawings, put the record in place first. CDTech can supply a revision-controlled drawing set and a tooling register for a bespoke module, and can confirm which artefacts a design generates. Write to [email protected] or use the contact page.

FAQ

What should an NDA cover beyond drawings?

Photomasks and reticles, firmware in binary and source form where it exists, bonding jigs and test fixtures, the optical film stack-up, the approved material list and the test limits with the reasoning behind them. Each can carry design intent that no outline drawing expresses. The practical test is simple: ask which artefacts would shorten a competitor's development if handed over, then check that each one appears in the definition of confidential information rather than only in a covering email.

Can tooling be moved to another factory?

It can, provided three things are settled in writing: title is clear enough that a lien cannot hold the asset, notice is long enough to qualify a replacement, and the cost of requalification is allocated. Physically moving a press or a mask set is straightforward. Proving that a different line reproduces the module takes a first article build and usually a reliability sample. The transfer procedure should therefore name crating, shipping and acceptance steps, not only a right to move.

How long should exclusivity last?

Long enough to protect the programme and no longer than the commercial justification supports. A common structure ties the term to the point at which tooling investment is recovered, with renewal as a separate decision. Beyond that point exclusivity is a concession, and a supplier will price it or decline it. Whatever the term, attach a volume floor with a defined consequence, because exclusivity without a purchase commitment is a preference that quietly lapses when capacity tightens.

Is a Chinese NDA enforceable?

Chinese law recognises confidentiality agreements, but enforcement depends on the wording, the governing law, the forum and the quality of the record showing what was disclosed. An agreement that defines confidential information by description is harder to enforce than one that references numbered drawing revisions and a signed distribution log. Arbitration is often chosen over local litigation for cross-border disputes. None of this is legal advice: have your own counsel review governing law, forum and remedy before signature.

×

Contact Us

(Accept word, pdf, dxf, dwg, jpg, ai, psd file, Max 10M)
captcha

By continuing to use the site you agree to our privacy policy Terms and Conditions.

I agree