CDTech LCD touch screen

display / touch / bonding solutions

Export Packaging and Freight Damage Claims for Glass Display Assemblies

Author: CDTech Publish Time:  Origin:

Freight damage claims on glass display assemblies are usually lost for reasons that have nothing to do with the damage. The module is genuinely cracked, the photographs exist, and the claim still fails because the delivery receipt was signed clean, or because the pallet was cut open before anyone photographed the strapping, or because a settlement offer arrived before the survey did.

This guide follows the chain that decides those claims: where glass fails in transit, the packaging that prevents edge chipping, tray and pallet construction for a heavy module, the photo sequence that survives scrutiny, what to write at delivery, the inspection window, customs openings, CIF insurance and settlement offers.

Where glass assemblies fail in transit: edge, corner, flex

Glass is strong in compression and weak in tension, so most transit failures start at an edge or a corner rather than in the centre of the panel. A microcrack at a cut edge propagates under a load the panel would otherwise survive, which is why a module can arrive with a crack that appears to have spread from nothing. Corners concentrate impact energy: a short drop onto one can chip the glass and leave the display working until the first thermal cycle opens the crack.

The third mechanism is flex. A pallet that bends under a forklift, or a carton levered by a strap, twists the module and its seal. Failures of that kind show as uniform pressure marks or a seal separated along one side, and they are the ones most often blamed on the supplier's process rather than on handling.

Packaging features that prevent edge chipping

Packaging prevents edge chipping by keeping load away from the glass edge and making any impact visible afterwards. Specify these features in writing, with material grades named and referenced to published standards such as those the ISO catalogue covers.

  • Corner blocks, not bubble wrap. Moulded foam at each corner, sized so the glass edge never touches the carton.
  • Standoff at the face. A gap between the viewing surface and any rigid surface, held by the tray.
  • No module-to-module contact. One cavity per unit, with the cavity carrying load through the frame.
  • Barrier bag and desiccant. Humidity control for a sea crossing, where condensation forms inside a sealed carton.
  • Shock and tilt indicators. Outside the carton, numbered, photographed before opening.
2.1 inch 480x480 round LCD display with RGB interface
A 2.1 inch 480x480 round LCD display with RGB interface. A curved edge sits unevenly in a rectangular cutout, so the tray cavity rather than the foam does the locating.

Tray, carton and pallet construction for a fifteen kilo module

At fifteen kilograms, handling loads rather than drop loads dominate the pack. The tray carries that mass through the frame or the mounting bosses, never through the glass, and the carton stops the tray moving when the box is tilted. Pallet construction then decides whether the stack survives a forklift and a sea crossing.

LayerFunctionWhat fails without it
TrayLocates the module, load through the frameGlass carries the weight and cracks at the edge
Foam setAbsorbs impact and damps vibrationEdge chipping and connector fretting
Outer cartonDistributes stacking load and holds the trayCrushed corners and pressure marks
PalletProvides a flat, stiff baseBending under forks flexes every module
Strapping and cornersHolds the stack without crushing itStrap cuts the carton and loads the glass edge

Document the construction as a packing drawing with materials named, so a change of foam or board grade becomes a revision rather than a substitution, following the AIAG convention automotive programmes use.

The photo protocol that makes a claim survive

A photograph is evidence only if it answers what someone will ask months later: was the carton damaged before it was opened, was the packing as specified, and is this the unit from that carton. That means a sequence taken before anything is unwrapped, with the shipping label in the first frame.

Shoot the sealed pallet with strapping and indicators, each face of the carton, and the indicators close up. Photograph the packing before the module is lifted out, then the damage with a scale reference and the serial label in the same frame. Keep the files unedited and timestamped with the delivery receipt, including the unremarkable frames, because an undamaged carton proves the damage happened inside it. The same discipline applies to inspection records, which the CDTech quality and reliability guide treats as data a supplier should hold.

Carrier notation at delivery: what to write and what to refuse

The delivery receipt is the document a carrier will rely on, and a clean signature is hard to argue with later. Note the condition before signing, in specific words rather than a tick, and keep the driver's copy in view while it is written.

  • Write what you see: carton crushed on one corner, strap broken, indicator triggered, two cartons wet.
  • Count the affected cartons and write the number, then sign for the total as a separate figure.
  • Refuse only when the consignment cannot be identified or is comprehensively destroyed; a refusal ends your access to the packing evidence.
  • Photograph the annotated receipt and the pallet before the driver leaves.
  • Keep the damaged packaging until the claim closes, since an inspector may ask for it.

A signature reads as acceptance, so a consignment signed clean and reported later describes something that may have happened in your own warehouse.

How long is the inspection window and when does it start

The clock starts at delivery, not at unpacking.

Carrier and insurer windows are counted in days from the delivery receipt, while your own inspection may not begin until the pallet reaches the line two days later.

Two clocks run at once and they are rarely the same length. The carrier's deadline for notifying damage is short and runs from delivery, sometimes from the date on the receipt rather than the hour the truck left. The contractual window in the sales agreement, the period in which a buyer may report a shortfall to the supplier, is usually longer. A claim that misses the carrier clock is not necessarily lost, but it becomes a claim against your own cargo insurance or your supplier, both of which will ask why the carrier was never told.

Set the internal inspection period shorter than the shortest external window, and define what inspection means: carton count, indicator check, photographs and a sample open. Where volume makes full inspection impossible before the deadline, inspect a defined sample, record the rest as uninspected, and notify the carrier of potential damage within the window rather than waiting for certainty.

Should pallets be opened at customs and who reseals them

Sometimes, and the reseal must be documented.

Customs may examine a consignment without the buyer present, and the practical defence is a forwarder who records the opening, photographs the pallet and reseals it on camera.

An examination is a legitimate act, not damage, and refusing it does not preserve the shipment. The risk is procedural: the carton is cut, the tray lifted, the strapping replaced with tape, and the packing that would have survived the last leg no longer exists. If a module then arrives chipped, the carrier can say the damage followed the examination.

Reduce the exposure before the shipment moves. Ask the forwarder to request examination in a covered area, to have the opening noted on the customs document with date and officer reference, and to photograph the consignment before and after resealing; then photograph the reseal yourself. Classification questions sit with the HS nomenclature; destination rules are published by the EU Access2Markets service and the International Trade Administration.

4.3 inch RGB TFT LCD module with 800x480 resolution
A 4.3 inch 800x480 RGB TFT module. Modules this size travel many to a carton, so one crushed corner can turn a single replacement into a lot decision.

Insurance under CIF and what the certificate must name

Under CIF the seller arranges carriage and insurance, and the buyer receives documents rather than risk. The cover the rule requires is a minimum rather than a specification for glass, and the certificate is often issued without the buyer reading it until a claim exists. The Incoterms 2020 text sets out what the seller must provide; the details that decide a claim sit in the certificate.

Check that the assured is named correctly, that the goods description matches the packing list rather than a generic category, that the voyage and transhipments are shown, and that the sum insured reflects delivered value rather than the invoice alone. Read which cargo clauses apply, since the minimum excludes perils that matter for glass, and check the deductible, which can exceed the value of a single module. Confirm that the certificate is assignable, because a buyer claiming in its own name needs that right, and ask for it before the vessel sails.

When the carrier offers a settlement instead of an inspection

An offer usually arrives because a survey costs more than the claim. A prompt payment covering replacement, freight and the labour of a swap can be the cheapest resolution available; a survey that takes six weeks can cost more in schedule than it recovers.

Price the claim before answering: replacement units at current cost, freight both ways, technician time, and any line delay from waiting. Compare the total with the offer and read the release language, because accepting usually closes the claim for the whole consignment, including units that have not yet failed. If the offer covers only visibly damaged units, say so in writing and reserve the right to claim for latent damage found within the inspection period.

Next step. If your team is specifying packing for a glass display shipment, CDTech can share how its modules are packed, which indicators and documents travel with them, and what evidence it needs from a receiving dock when something arrives damaged. The frequently asked questions cover the common cases first.

Ask about packing and damage claims · [email protected]

FAQ

What packaging prevents corner chipping?

Moulded foam or EPE corner blocks that hold the glass edge clear of every rigid surface, inside a tray that carries the module's weight through its frame. Bubble wrap alone compresses under load and lets the corner reach the carton wall. Add edge protectors under the strapping, keep each module in its own cavity, and specify the packing as a drawing with material grades, so that a substitution is a revision rather than a quiet change.

How long is the claim window?

Two windows usually apply and they differ. The carrier's notification deadline is short and runs from the delivery receipt, while the contractual period for reporting a shortfall to the supplier is normally longer and set in the sales agreement. Set your internal inspection period below the shortest external deadline, notify the carrier of potential damage within it even when the inspection is incomplete, and record what was and was not examined.

Should pallets be opened at customs?

Sometimes they are, and the buyer rarely controls it. Customs may examine a consignment without the importer present, which cuts the carton and replaces the strapping. Ask the forwarder to have the opening recorded on the customs document, photographed before and after resealing, and to request a covered area for the examination. Then photograph the reseal at delivery, so that any later damage can be dated to the leg it happened on.

Who arranges insurance under CIF?

The seller arranges it and provides the certificate, but the cover required is a minimum rather than a specification for glass. Check that the assured is named correctly, that the goods description matches the packing list, that the voyage and transhipments are shown, and which cargo clauses apply. Look at the deductible and at whether the certificate is assignable, and ask for it before the vessel sails rather than after the pallet arrives damaged.

×

Contact Us

(Accept word, pdf, dxf, dwg, jpg, ai, psd file, Max 10M)
captcha

By continuing to use the site you agree to our privacy policy Terms and Conditions.

I agree